SMOBY Set de 6 dalles 45 x 45 cm - plancher maison

Product Information

Two pallet slats were then cut to length and mitred to fit either side of the rungs to prevent anyone falling over the side. One point to note is that all the bolts were pushed through from what would be the inside to ensure the inner area was as free from any protruding items as possible, as we would be adding a tyre swing some time down the line. BillyOh two-storey playhouses can also be customised with paint options for your favourite colour. So make sure your customise the perfect two-storey playhouse for you too! After all it will be in your garden. After breaking the pallets down (we needed 2 to provide all the required slats) we then sanded them down using an orbital sander and 80 grit paper. Pallet timber can be quite rough so we wanted to avoid any splinter or graze injuries.

To construct the kids playhouse in our tutorial below we used 3×3 inch timber fence posts to build the main structure and access ladder, 3×2 inch pressure treated timber for the balcony and then 2×2 inch timbers to form the doorway and ballustrade around the balcony. The same process was then repeated for the other side. Once completed the main structure of the balcony was now finished. Using heavy and sturdy timbers such as fence posts would ensure that our playhouse could withstand any amount of use thrown at it. Painting your playhouse can help to bring it to life. It can also be a fun project to undertake with your children.With both sections now assembled, the rear support leg section was then positioned in its final position, you may need help here as the structure will be getting heavy at this stage. Bear in mind that our buildings are intended for toddlers, and so are not suitable for children aged under 36 months. This is because there may be small parts that could be potential choking hazards. In addition, they're not designed for older children; there is often a maximum user weight of 50kg. Finally, to ensure your children's complete safety, we highly recommend adult supervision while your children play in their cubby house. The BillyOh Guarantee The final job was now to clad the areas around the door openings. This was simply a matter of measuring from the edge of the support leg to the edge of the door opening and cutting the pallet slats down to fit. You can even build them into your playhouse theme or swap them out at different times of the year. Think:

Where any slats were too big to fit the available gap they were again cut down to size. Add balcony flooring and balustrade But within the categories of plastic and wooden playhouses, there are a few different styles on offer. Playhouse by type: Single storey As we were going to make the playhouse 1200mm square we first cut all of our lengths of fence post down to 1200mm in length.The braces were then laid onto the door slats and squared up and screwed in place using two 35mm timber screws per slat.